| Application | Roadway and area lighting utilizing ANSI C136.41 interface |
| Operating Temperature Range | -40 to 85C [-40 to 185F] |
| Base Housing Material | UL 94V-0, UV f1 rated thermoplastic |
| Cover Material | UL 94V-0, UV f1 rated thermoplastic |
| Line Voltage Contacts Material | Brass plated overall with tin |
| Dimming Signal Contacts Material | Copper alloy with gold plating (contact interface), tin plated (solder tail), nickel under-plate |
| PC Board Standoffs | 4 |
| Gasket Seal | Molded to base, provides seal between base and cover, and base and receptacle |
| Dimming Signal Contacts | 2 or 4 |
| Storage Recommendations | Keep in shipping containers, use first-in, first-out basis, avoid chemical exposure (alkalies, ammonia, citrates, phosphates, sulfur compounds, amines, carbonates, nitrites, tartrates) |
| Handling Precautions | Do not bend or damage pre-installed dimming brush contacts |
| PC Board Placement | Thru-hole solder tails, pattern on customer drawing, PC board rests on standoffs |
| Soldering Requirements | Acceptable hand-soldering techniques, conform to IPC-A-610 and IPC J-STD-001 |
| Cover Assembly | Align cover key and base keyway, press squarely using assembly fixture and press, ensure all 6 latches are fully engaged |
| Vented Base Assembly | Ensure external/internal features do not touch vented areas, minimum 1mm gap recommended |
| Mounting Location | Top of light fixture, away from direct artificial light; orient North indicator North if possible |
| Workmanship | Control base must not be damaged, inspect for proper/undamaged contacts, ensure cover latches are fully engaged |
| Contact Connections | Aligned per Figure 5, mating per ANSI C136.41-2013, polarization via neutral blade size |
| Mating/Un-mating | Align blades, push until bottomed, twist clockwise to lock; twist counter-clockwise and pull to un-mate |
| Repairability | Contacts and control base are not repairable; replace if damaged. Assembled base and cover are not repairable. |
